News — Hidden deck fasteners

Mark the support wood or distance of the substructure on the back of the decking board and drill the fasteners on the marked points . To do this, place the fasteners against the stop pin and drill in the first screw (5 x 17 mm) through the middle hole and tighten it properly.Important: Tighten screws only with torque, never overtighten and never predrill!When fastening in the outer slotted holes, the wood moisture content must be taken into account (you must ask your wood dealer about this) so that the screws can adapt to the behavior of the wood.a) Depending on the plank width, select suitable...