News

How do i find the right CEILING HANGERS for my ceiling?

Posted by Lucas Novak on

How do i find the right CEILING HANGERS for my ceiling?

For stable recessed ceilings, we offer you millimeter-precise adjustable ceiling hangers in suspension ranges from 100 mm to 5000 mm in length. These "Vernier" hangers have already proven themselves millions of times on large construction sites worldwide and are already used by many drywall companies to suspend your domestic ceilings. With this knowledge, you can be sure to make the right choice for hanging your recessed ceiling.   Description of Nonius-Hanger-System:Top of the ceiling hangersThe Früh "Nonius" hangers (upper parts) are available in lengths between 200 mm and 5000 mm, always ascending by 100 mm, so you can hang with...

Read more →

How do you find the right hidden fasteners for your TONGUE AND GROOVE Board?

Posted by Lucas Novak on

How do you find the right hidden fasteners for your TONGUE AND GROOVE Board?

How do I find the right tongue and groove fastener for my profile board?To find the right fastener for your profiled board, it always depends on these 2 factors: Groove Cheek Thickness (B):The groove stringer thickness (B) describes the back stringer which is fastened to the ceiling or wall with the profiled wood clip. For Früh fastening clips, these range from 1.8 - 6 mm groove cheek thickness, which means you can fasten profiled boards with up to 6 mm groove cheek thickness.Groove depth (A):The milled groove depth (A) of your profiled wood must always match the groove depth of...

Read more →

How to use your FRUH tongue & groove fasteners

Posted by Lucas Novak on

How to use your FRUH tongue & groove fasteners

Preparations for your wall paneling or wooden ceiling panelingDo you have in mind a beautifully finished and energy-saving ceiling or a wall neatly paneled with wood? At your nearest lumber dealer or hardware store you are sure to find everything you need, such as: Wooden slats for a stable substructure profiled wood boards of your choice (tongue and groove / tongue and groove profile) Ceiling hangers for safely and stably installed wooden ceilings You have all the materials together, such as your wooden substructure for wall paneling or your ceiling hanger for your wooden ceiling?You will find the suitable tongue...

Read more →

How to fasten your deck with the hidden deck fasteners

Posted by Lucas Novak on

How to fasten your deck with the hidden deck fasteners

Mark the support wood or distance of the substructure on the back of the decking board and drill the fasteners on the marked points . To do this, place the fasteners against the stop pin and drill in the first screw (5 x 17 mm) through the middle hole and tighten it properly.Important: Tighten screws only with torque, never overtighten and never predrill!When fastening in the outer slotted holes, the wood moisture content must be taken into account (you must ask your wood dealer about this) so that the screws can adapt to the behavior of the wood.a) Depending on the plank width, select suitable...

Read more →